*Eumig P8 Dual Manual For Sale
*Eumig P8 Dual Manual Transmission
A guide to the Eumig P8 cine projector. I have been using these projectors for over 40 years! This is it the manual for the Eumig P8 automatic 8mm cine projector. There are various articles about this projector on the site – the main review for the auto version is here.
Eumig Mark S 810 D High Quality Sound Projector
A dual gauge sound projector. Plays Super8/Single8 and standard8.
Lens: Vario Eupronet 1,3/15-30 mm.May also be equipped with some other Eupronet zoom lens.
Halogen lamp 12 V/100 W type EFP
By resetting TCP/IP stack on Windows 10.Check below how to use Netsh commands to reset TCP/IP stack, reset IP address, renew TCP/IP settings, etc. Open Command Prompt Windows 10Netshell is a Windows command-line utility which allows you to check and modify the network configuration of your computer. Netsh int ip reset allison transmission.
Sound: mono ( record&playback ), fade in / fade out, sound-on-sound, mixing from external source ( microphone 0,3-150 mV, 22 kΩ; line in 50 mV - 3 V, 1 MΩ )
Amplifier 15W, option for external amplifier ( line out 0,5-1,5 V, 50 kΩ )
Internal loudspeaker
Option for external loudspeaker ( 4 - 8 Ω, 10W )
Auto threading
Forward/backward projection
Speeds: 18 fps and 24 fps
Reel capacity: 180m/600ft
Weight appx. ???
Accessories: Universal reel; 8mm to super8 stepper for the front arm spindle; microphone; 6 m reel of magnetic striped film; film head trimmer/clipper.
Optional accessories: Eumig Serie 600 Daylight Viewer; Eumig LS-800 loudspeaker; Universal re-recording lead ( a cord + four adapters ).
Comments[edit]
Changing between standard8 and S-type film formats requires changing the gate assembly and sprocket wheel set. If You are considering to buy this projector You should check that both sets are present. The second set of sprocket wheels is stored on the inner side of the removable front panel and the additional gate assembly is in a horizontal slot in the body, also under the front panel. When changing the gate assembly, the knob at the rear of the projector should be manually turned to position where the red dot is up.Eumig P8 Dual Manual For SaleeBay[edit]Eumig P8 Dual Manual TransmissionRetrieved from 'http://super8wiki.com/index.php?title=Eumig_Mark_S_810_D_Projector&oldid=17690'
